The Turbo Racer is the most exciting multi-line slide on the market and Fibrart has it among its wide range of water attractions to complement parks which need high flow, but do not want to have the same attraction as the neighboring park. The Turbo Racer offers the option to use a section of closed slide with a mat and head down as in any multi-line slide, but there is also a transition between the closed slide with turns and the point where you reach a straight fall where usually only the horizon can be seen, thus converting a simple multi-line into a truly exciting ride which provides a high dose of emotions while being safe for children and adults and providing a high flow as a water attraction.
All the multi-line rides are big and need large and above all long spaces of over 100 mts (300’) of length by 15 mts (45’) of width, and the Turbo Racer is no exception, in fact the required space in width is increased by the start of the ride and at the halfway point, so that the space can be administered under the attraction.
This is a ride which has been successfully installed and in operation for many years and companies providing experience and engineering have created many variations of the ride, as it is a more difficult ride to place than it seems, because developing transitions from closed to open rides can’t be done by anyone. Nevertheless the management of the slopes, water flows and user movements which need to be done for the start of operations are a challenge for engineers who need to adapt various options to maintain the safety of the closed ride in its turns, the stability of the multi-line which at the same time should retain the high rotation of users which characterizes the large multi-line slides. At Fibrart we are proud to be able to deliver to our clients a proven option for installation in your park which immediately becomes a star providing hours of fun for many people and at the same time generating a large promotional effect due to its form and challenging size.
The flamboyant figure of the Turbo Racer is one of a kind as it usually has 15 mts (45’) of height in its typical configuration and can even achieve 25 mts (75’) in its bigger forms, the curls in its initial part with a waterfall-like fall to end up in the braking channel occupying nearly the same space as a small running track; all of this makes Turbo Racer an attraction which cannot be easily forgotten after having seen it and above all it will attract many curious people who will want to try to use the imposing slide and share the emotions with their friend or family group.
The typical configuration consists of 6 lanes as in the majority of regular aquaracers, but it can also be configured for 2, 4, 6, 8 or 10 channels with no problem what so ever, your budget and space being the only limit. The Turbo Racer has a capacity of 300 users per line per minute which makes it recommendable for large parks or those which wish to provide abundant entertainment for their users.
The typical water flow per channel is only 25lts/sec (6.6 gal/sec) which makes the operating cost of the Turbo Racer similar to the cost of an open medium-sized slide. Fibrart configures its Turbo Racer so that it can also be used partially saving on the operating cost during the low season without having to take away the star attraction of your park from your guests.
If you need a large slide which guarantees ease of operation, great image which will not be mistaken for the neighboring park, the Turbo Racer is the indispensable attraction among your expansion or starting options for the park, in order to create a great differentiation with your competition.